Already have an account? Sign in
Work in progress
As a parent, what do you do when your child takes an oath to serve Saruman? Make them a proper set of Uruk Hai armor of course!
DIY build using 3D printed enclosure and parts, a recycled Bluetooth speaker, a Raspberry Pi, and a Philips Hue light bulb.
I needed a simple media player that my son can understand. I could not find a commercial solution, so I built one based on a Raspberry Pi.
Hello Friends, in this tutorial we are going to see hot to build this Weather Forecast Display. It uses a Wemos D1 mini board.
Building an HMD with no special parts, to make work easier and safer.
Fly a drone using only your voice. Launch, navigate around, and land. Look ma, no hands!
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
A tattoo artist friend of mine and I were discussing some of the limitations of current tattoo power supplies. I custom built her one.
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Arnab Kumar Das
Being a parent for the first time is a big challenge. With the Baby Night Activity Program and a lot of sensors, parents will have new help.
I wanted an amp with a difference, rising candles and opening panels.
I've always wanted to make a powered hacksaw - after seeing a homemade one, I figured that I could do that too.
A 3D printed Soldier: 76 mask, complete with blinking lights and a removable faceplate!
Square Off is a tangible chess board on which you can play chess against the AI or challenge any friends across the globe- 11th Oct, On KS
This is first version of my low cost 3d printed robot arm based on Ikea Tertial lamp.
What if Motorola made a cellphone in 1940? It might look like this.
Strong like a truss but moves like a slug = Gluss. A radical approach to scalable robots that allows serious research on a hobbyist budget.
Robert L. Read
ReSpeaker Messenger, send and receive voice messages to and from Slack or Telegram.
Precise GPS navigation with a Raspberry Pi for my Big Rob robot, which is also powered by a Raspberry Pi.
The Wheel magically turns and dispenses the worst fates from all your favourite fairy tales. Complete with sound, lights and mythic automata
My folding bike become an electric bike.
3D printing and laser-cutting to create the case.
Electronic board with Arduino and Bluetooth.
I have designed and built my own CO2 lasercutter. This lasercutter uses a 40 W laser and has a working area of 560 by 960 mm.
A robotic donation box that engages the donor and creates collaborative video art based on their donation.
I created an alarm clock which gets me out of bed as pleasantly as possible. It wakes me up to a Spotify playlist & controls a BT light bulb
If you're obsessed with finish and quality, this is the perfect tutorial for you: how to make a professional concrete lamp!
Robot called by my son - Transformer's Baby ;-). Intelligent toy which can autonomously drive on the floor avoiding obstacles.
Most remote controls look pretty much the same, they serve a purpose. They could look good too.
Hi, I would like to present you the electric go kart project which I've made for my son. Such car isn't very hard to build.
Gotta catch those ghosts! Take it wireless with the ghostbusters armband.
Or connect with your social account:
New here? Create an account